Cupriavidus gilardii|BNCC359193 |BNCC

Essential Information Certificate Related Products

Cupriavidus gilardii

Culture medium	Tryptone soybean medium (TSA/TSB): tryptone 17.0g, soybean peptone 3.0g, sodium chloride 5.0g, dipotassium hydrogen phosphate 2.5g, glucose 2.5g, agar 20.0g (without liquid medium), distilled water 1.0L,pH 7.3±0.2. Sterilization at 121 ℃ for 15min.
Subculture procedure	(1) Prepare a test tube containing 5~10mL of liquid medium and 2 plates; (2) Open it in the biosafety cabinet, heat the tip of ampoule in a flame, quickly drop sterile water to creak it, then break it with forceps; (3) draw 0.5mL of liquid culture medium into a freeze dried ampoule, fully rehydrate and transfer the solution to the liquid test tube, mix evenly; (4) inoculate a plate with 0.2mL of suspension liquid, repeat the step to obtain two plates; ⑤ Put all the liquid test tubes and plates under the above culture conditions for cultivation, and the strains can be used when they grow.
Growth conditions	37 ℃;18-24h; Aerobic;
Storage conditions	2-8 ℃
morphology	Size: 1-2mm Shape: Round Edge: Irregular Transparency: Opaque Color: light yellow uplift: middle convex surface: bright and smooth texture: moist and easy to stir up
Separation substrate	whirlpool
Sharing mode	Public welfare sharing

Cupriavidus gilardii

Storage conditions : 2~8 ℃

No. : 359193

Product format :freeze dried, 200ul

Validity : 6 years

Biosafety level : 2, handle in safety cabinet

Receiving notice: if any abnormality is found on the day of receiving goods, please contact customer service within 24 hours. if the goods are overdue, it will be deemed as good. Dry powder shall not be retained after one use, and can be used after activation for 1~2 generations. please refer to the attached page for the use of inclined plane and bacterial liquid. Please activate in strict accordance with this instruction, otherwise the replacement service will not be provided if the strain is abnormal and inactivated.

Growth conditions:37 ℃, aerobic, tryptone soybean medium, 18-24h. Tryptone soybean medium: tryptone 17.0g, soybean peptone 3.0g, sodium chloride 5.0g, dipotassium hydrogen phosphate 2.5g, glucose 2.5g, agar 20.0g (not included in liquid medium), distilled water 1.0L,pH 7.3±0.2. Sterilization at 121 ℃ for 15min.

Recovery steps:

(1) Prepare a test tube containing 5-10mL of liquid culture medium and 2 plates;

(2) Open the ampoule in the biosafety cabinet, heat the tip of ampoule in a flame, quickly drop sterile water to creak it, then break it with forceps;

(3) Draw 0.5mL of liquid culture medium into a freeze dried ampoule, fully rehydrate and transfer the solution to the liquid test tube, mix evenly;

(4) inoculate a plate with 0.2mL of suspension liquid, repeat the step to obtain two plates;

(5) Put all the liquid test tubes and plates under the above culture conditions for cultivation, and the strains can be used when they grow.

Recovery record: According to the recovery instructions, the results of the recovery are reported as follows:

Item	test results
viability	good viability， in 24 hours liquid medium become turbid,strain layer is obvious;colony is typical on the streaked plate
colony morphology: (above)	Size: 1-2mm Shape: Round Edge: Irregular Transparency: Opaque color: light yellow uplift: middle convex surface: bright and smooth texture: moist and easy to stir
Conclusion	good viability, no abnormal colony morphology, qualified