Pseudomonas aeruginosa (Pseudomonas aeruginosa)|337099 |BNCC

Essential Information References Certificate Related Products

Pseudomonas aeruginosa

Subculture procedure	① Prepare 2 of the above plates; ② After disinfecting the surface of the ampoule tube, open it in a safety cabinet, burn the top with an alcohol lamp, quickly drip sterile water to break it, and then use tweezers to crush it; ③ Take 0.5mL of sterile water and transfer it into a freeze-drying tube. After fully dissolving the bacterial powder, transfer it into 2 plates at a rate of 200 μ L per Agar plate and apply evenly; ④ Place the petri dish under the above cultivation conditions for cultivation, and once the bacterial strain grows, it can be used.
Growth conditions	37 ℃; 18-24h; aerobic
Storage conditions	2-8 ℃
Safety level	1
morphology	The colony diameter is 2-4mm, circular, with irregular edges, opaque, yellow on the front, lighter in color, raised in the middle, smooth on the surface, bright on the surface, moist in texture, producing green pigment, G - (red), Bacillus, purity: pure
Sharing mode	Public welfare sharing

1.Description

1.Name: Pseudomonas aeruginosa

2. BNCC No.:337099

3.Biosafety level:4

2. Storage conditions

Storage of freezed dried ampoule and agar slant at 2°C to 8°C

3.Growth Conditions

1. Nutritious gravy agar: beef paste 3.0g, peptone 10.0g,NaCl 5.0g, agar 15.0g, distilled water 1.0L,pH7.0. [Note] Add 5mg MnSO4·H2O when culturing Bacillus，which is beneficial to spore production. pH7.0. 121 ℃,15min.

2. Atmosphere: aerobic

3.Temperature: 37 ℃

4.Notes:

1.Normal culturing time, 1-2days for bacterial, 3 days for yeast, 5-7days for mould, 7-10days for fungal.

2.Agar slant shall be inoculated asap, and long-term storage is not recommended.

3.Please recover the strains in strict accordance with this instruction, otherwise the replacement of the strain are not be available in case of viability loss caused by different media or growth conditions.

4.Users should ensure the safe storage and operation of the strain.Waste generated from the handling process should be discarded after high-pressure sterilization.

Download certificate