Dark green wood mold|341839 |BNCC

Essential Information References Certificate Related Products

Trichoderma atroviride P. Karst.

Subculture procedure	① Prepare 1-2 tablets mentioned above; ② Open the safety cabinet, burn the top with an alcohol lamp, quickly drip sterile water to break it, and then use tweezers to crush it; ③ Take 0.5mL of sterile water and transfer it into a freeze-drying tube. After fully dissolving the bacterial powder, transfer it into two plates, each plate containing about 200 μ L, and apply evenly; ④ Place the petri dish under the above cultivation conditions for cultivation, and once the bacterial strain grows, it can be used.
Growth conditions	25 ℃ -28 ℃; 5-7 days; aerobic;
Storage conditions	2-8 ℃
Safety level	1
morphology	Small filamentous fungi have obvious colonies on comprehensive PDA medium, with white and dense hyphae in the early stage, and later produce yellow spores that grow on flat plates
Sharing mode	Public welfare sharing

Description

1. Name: Trichoderma atroviride P. Karst

2. BNCC No.: 341839

3. Biosafety level: 4

2. Storage conditions:
Storage of freezed dried ampoule and agar slant at 2°C to 8°C

3. Growth Conditions

1. Medium composition: potato extract 1.0L, glucose 20.0g, agar 15.0g,pH natural. [Note] Potato extract: 200g of peeled potato is taken, cut into small pieces, add 1.0L of water to boil for 30min, filter out potato pieces, and supplement the filtrate to 1.0L.

2. Atmosphere: aerobic

3. Temperature: 25 ℃

4. Notes:
1.Normal culturing time, 24-48hours for bacterial, 72 hours for yeast, 5-7days for mould, 7-10days for fungal.

2.Agar slant shall be inoculated asap, and do not keep the storage for more than 3 months.

3.Please recover the strains in strict accordance with this instruction, otherwise the replacement of the strain are not be available in case of viability loss caused by different media or growth conditions.

4.Waste generated from the handling process should be discarded after high-pressure sterilization

Download certificate