Botrytis cinerea|196237 |BNCC

Essential Information Certificate Related Products

Alternaria brassicicola

Subculture procedure	① Prepare one 90mm solid Agar plate, one inoculation shovel, and one inoculation hoe; ② Inoculation shovel, inoculation hoe, flame burn, cool for later use; ③ After disinfecting the outer wall of the inclined surface, open it in a sterile environment, first use an inoculation hoe, and then use an inoculation shovel to cut into pieces; ④ Inoculate the bacterial block with a spatula, place it on the surface of a agar plate, and cover the Agar plate; ⑤ Place the flat Agar plate in the fungi incubator and cultivate it according to the above conditions. Do not seal it with a sealing film. The Agar plate can be used when it is almost full.
Growth conditions	28 ℃, 5-7 days, aerobic
Storage conditions	-80 ℃
Safety level	1
morphology	Small filamentous fungi have obvious colonies on comprehensive PDA medium, with yellow brown hyphae, dense and flat, almost no spread, and yellow brown on the back of the medium
Sharing mode	Public welfare sharing

1.Description

1. Name： Alternaria brassicicola

2. BNCC No.：196237

3. Biosafety level：4

2.Storage conditions：

Storage of freezed dried ampoule and agar slant at 2°C to 8°C

3.Growth Conditions

1. Comprehensive PDA: potato boiled juice 1000mL, potassium dihydrogen phosphate 3g, magnesium sulfate 1.5g, glucose 20g, vitamin B1 10mg, agar 20g,pH natural. Potato boiling solution: 200g of potato, peeled, cut into pieces, boiled in distilled water for 30min, constant volume of filtrate to 1000mL for later use. 121 ℃,15min.

2. Atmosphere：aerobic

3. Temperature： 25 ℃

4.Notes：

1.Normal culturing time, 24-48hours for bacterial, 72 hours for yeast, 5-7days for mould, 7-10days for fungal.

2.Agar slant shall be inoculated asap, and do not keep the storage for more than 3 months.

3.Please recover the strains in strict accordance with this instruction, otherwise the replacement of the strain are not be available in case of viability loss caused by different media or growth conditions.

4.Waste generated from the handling process should be discarded after high-pressure sterilization

Download certificate