|Culture medium||Potato glucose agar (PDA): 1.0L of potato boil, 20.0g of glucose, 15.0g of agar, natural pH. Sterilization at 121 ℃ for 15min. Potato boiling liquid: weigh 200g of peeled potato pieces, boil in boiling water for 30min, and collect the filtrate to a constant volume of 1.0L.|
|Subculture procedure||(1) Prepare a test tube containing 5~10mL of liquid medium and 2 plates; (2) Open it in the safety cabinet, heat the tip of ampoule in a flame, quickly drop sterile water to creak it, then break it with forceps; (3) draw 0.5mL of liquid culture medium into a freeze dried ampoule, fully rehydrate and transfer the solution to the liquid test tube, mix evenly; (4) inoculate a plate with 0.2mL of suspension liquid, repeat the step to obtain two plates; ⑤ Put all the liquid test tubes and plates under the above culture conditions for cultivation, and the strains can be used when they grow.|
|Growth conditions||28 ℃;5-7 days; Aerobic;|
|Storage conditions||2-8 ℃|
|morphology||The colony texture is velvety; the surface forms irregular concentric rings; the edges are not neat; the colony is dark green to dark green; the reverse side is slightly yellow and white; there is no exudate.|
|application||Mold rot test bacteria. GBT 1741 "Detection of Mold Resistance to Mold in Paint Film"|
|Sharing mode||Public welfare sharing|
1. BNCC No.: 187704
2. Biosafety level: 4
Storage of freezed dried ampoule and agar slant at 2°C to 8°C.
1. Wort agar medium: malt paste powder 130g, agar 15g, chloramphenicol 0.1g, distilled water 1L,pH6.0±0.2.
2. Atmosphere: aerobic
3. Temperature: 28-30 ℃
1.Normal culturing time, 24-48hours for bacterial, 72 hours for yeast, 5-7days for mould, 7-10days for fungal.
2.Agar slant shall be inoculated asap, and do not keep the storage for more than 3 months.
3.Please recover the strains in strict accordance with this instruction, otherwise the replacement of the strain are not be available in case of viability loss caused by different media or growth conditions.
4.Waste generated from the handling process should be discarded after high-pressure sterilization.